Panasonic -eng User Manual
Page 21
21
Basic operations
Recording on discs in standard quality (Simply Create DVD-Video Disc)
4
Click and select the DVD disc to record to.
5
Click and select the video image quality.
[High quality]: Priority to video quality
[Standard quality]: Priority to recording capacity
6
Click [Start writing].
This button is not available unless you have selected at least one item.
●
7
Click [OK] when the confirmation
message is displayed.
If you click [Cancel], the previous window is displayed.
Recording now begins, and the status is shown in the
progress indicator.
It takes time to record all the data. Do not operate the computer
until recording is finished.
Clicking [Cancel] when changing discs or during data conversion
will stop recording in progress. However, recording cannot be
stopped when data is being written.
Content that does not fit on a single disc during DVD recording
will be split and recorded over multiple discs. The approximate
number of discs needed is indicated (
B
). Follow the instructions
displayed to switch to a new disc.
During multi-disc recording, you can stop recording when it is
time to load the second or subsequent disc. Information about
the remaining content will be displayed then. To record the
remaining content later, refer to this information and select the
content again, and then resume recording.
If a media problem causes recording to fail, follow the instructions
to replace the media. The content you were recording when the
failure occurred will be recorded again on the new media.
●
●
●
●
●
●
8
Click [OK] when a message is displayed
indicating that recording is complete.
B
Content on SD cards or on your computer can also
be recorded to a DVD disc (except for video content
converted into the MPEG2 format)
In step
2
, select an inserted SD card or a folder on your
computer instead of your video camera.
Data cannot be imported between the same kinds of media, such
as from one DVD disc to another or from one SD card to another.
Different media cannot be used to record to a single media.
●
●
Tip
Discs created this way are for playback only. Additional content
cannot be recorded on them.
Lower-performance computers may require a significantly longer time
for disc recording.
Digital photos cannot be recorded with this function. To record photos
(“Recording photos”
When creating media of relay recorded video content continuously
recorded on different memory (e.g. hard disk or SD cards) with
compliant video cameras, only video content in the memory selected
at the time of connection is imported.
For further details on recording on various media
●
●
●
●
●