Colour night view function – Panasonic HDC-SD1 User Manual

Page 50

Advertising
background image

50

VQT1A34

Recording

Pause recording. (Fade out)

The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
≥After recording, the fade setting is cancelled.

To cancel fading

Select [

] again.

The colour which appears in fading pictures can
be selected.

Press the MENU button, then select
[VIDEO]

#

[FADE COLOUR]

#

[WHITE] or [BLACK]

and press the

cursor button.

≥If you turn off the power, the fade function is

cancelled.

≥While the fade in/fade out function is selected,

it takes several seconds to display the image
when you start recording. It also takes several
seconds to pause recording.

≥The thumbnails of scenes recorded using fade

in become black (or white).

This function allows you to record colour subjects
in dark locations (Minimum required illumination:
approx. 2 lx) to stand out against the
background.
Attach this unit to a tripod, and you can record
images free from vibration.
Recorded scene is seen as if frames were

missed.

¬

Rotate the mode dial to select

.

1

Press the cursor button. Then

move the cursor button down to

display the icon shown in the

illustration.

2

Move the cursor button up to
select [

].

To cancel the colour night view function

Select [

] again.

≥The focus indication does not appear even if

the PHOTO SHOT button is pressed halfway.

≥When using auto focus, it will take some time to

focus in dark areas. If there is difficulty focusing
with auto focus, manually adjust the focus.

≥The flash cannot be used.
≥The colour night view function makes the signal

charging time of CCD up to approximately 8k
longer than usual, so that dark scenes can be
recorded brightly. For this reason, bright dots
that are usually invisible may be seen, but this
is not a malfunction.

≥If you turn off the power or operate the mode

dial, the colour night view function is cancelled.

≥If set in a bright place, the screen may become

whitish for a while.

To select the colour for fade in/out

Colour night view function

This allows recording in dark

locations.

VQT1A34_GC_ENG.book 50 ページ 2007年1月27日 土曜日 午後1時46分

Advertising