AT&T 974 - Manual

1
QUICK START GUIDE
AT&T Small Business System
Speakerphone with Intercom and
Caller ID/Call Waiting 974
This Quick Start Guide provides basic instructions. For additional
installation options and complete instructions which allow you to
use all features of this phone, refer to your AT&T Small Business
System Speakerphone with Intercom and Caller ID/Call Waiting 974
User's Manual, Part 2.
Installation
Installation of a DSL splitter may be required to use the advanced
features of this telephone if you have DSL (digital subscriber line)
service. Please see DSL users starting on page 4 of your User’s
Manual, Part 2 for details.
If you are installing multiple phones in your phone system, you must
install and program one set at a time. Each phone MUST be assigned
a unique extension number.
Battery installation
Install a 9V alkaline battery (purchased separately) in order to use some features
of this telephone in the event of a power failure. If power fails and a working
battery is installed, all four lines of this phone will work only to answer calls
with the handset or headset, and to dial calls using the dial pad keys and the one
touch or redial features. No other features will work until power is restored.
1. Remove the wedge from the underside of the base unit. Press
on the tabs and pull the wedge away from the phone.
2. Remove the battery compartment screw with a small Phillips
head screwdriver.
3. Pull on the tab to remove the battery compartment cover.
4. Insert a 9V battery (purchased separately) following the
polarity markings in the battery compartment.
5. Replace the battery compartment cover and the screw.
6. Reattach the wedge to the base unit by sliding the tabs into the
holes. Snap the wedge onto the base.
974QSG_(Rev14)ml_23.5.06 5/23/06 11:28 AM Page 1