AeroBed Domed Valve - Manual (Page 2)

CLEANING
We recommend that you do not let the plush surface of your AeroBed Raised get wet. Repeated exposure to water or other liquids may cause damage to the
plush surface that will not be covered by your warranty. Should liquid come in contact with the plush surface, blot liquid dry and use a damp cloth to remove
any stain. Let surface air dry completely.You may clean the PVC on the sides and bottom of your bed with a mild dishwashing detergent or household cleaner.
Do not use stong chemicals or other compounds. Allow your bed to air dry completely after cleaning and before storing.
Mattress Cover (if included)
Machine wash separately in warm water, gentle cycle using mid soap or detergent. Do not bleach. Tumble dry with low heat, remove immediately after drying.
Use cool iron if needed.
LIMITED EXPRESS WARRANTY
Aero Products International, Inc. (“us”) warrants to the original purchaser (“you”) that the AeroBed® (“product”) is guaranteed against defects in
materials and workmanship for the following periods: the pump and valve, three (3) years from the date of purchase; the mattress one (1) year from the date
of purchase.
OUR EXCLUSIVE OBLIGATION, AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED EXPRESS WARRANTY OR OTHERWISE SHALL BE
THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR PARTS WHICH MAY PROVE DEFECTIVE UNDER THE CONDITIONS AND DURING
THE PERIODS DESCRIBED ABOVE AT OUR SOLE COST AND EXPENSE. IN THE EVENT THE PRODUCTS OR PARTS CANNOT BE REPAIRED
OR REPLACED, YOU SHALL RECEIVE A FULL REFUND OF THE PURCHASE PRICE AT OUR OPTION. THIS LIMITED WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
EXCLUSIONS
Our obligation under this limited express warranty shall not apply if our inspection shows:
A. That the product is used for other than normal indoor sleeping purposes
B. Any product or part has been damaged by alteration.
C. Any product or part has been subject to accident, misuse, abuse or has been operated contrary to written
instructions.
WARRANTY REDEMPTION
You must obtain an authorization from us before returning a defective product. Call us at 1-888-462-4468 or write us for a return authorization. The product
should be carefully packaged and delivered postage or delivery charges prepaid at the address set forth below. You are responsible for all damages incurred
during shiping.
WARRANTY DISCLAIMER
EXCEPT FOR THE LIMITED EXPRESS WARRANTY SET FORTH IN THIS SECTION, OR ANY IMPLIED WARRANTIES PERMITTED UNDER APPLICABLE
LAW, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS. ALL CLAIMS AGAINST US MUST BE BROUGHT WITHIN ONE (1) YEAR FROM
THE TIME THEY ARISE.
LIMITATION OF LIABILITY
TO THE FULLEST EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES WITH RESPECT TO THE SALE OR USE OF THE PRODUCTS, INCLUDING ANY LOST REVENUES, LOSS OF USE OR LOST PROFITS,
REGARDLESS OF THE THEORY BY WHICH ANY CLAIM MAY BE BASED, INCLUDING ANY TORT, TANGIBLE PROPERTY DAMAGE OR STATUTORY
CAUSES OF ACTION. NOTWITHSTANDING THE TERM OF ANY LIMITED OR IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY
FAILS OF ITS EXCESS ESSENTIAL PURPOSE, IN NO EVENT WILL OUR ENTIRE LIABILITY TO YOU EXCEED THE PURCHASE PRICE ACTUALLY PAID
BY YOU FOR THE PRODUCTS, OR ANY DEFECTIVE OR NONCONFORMING PORTION THEREOF, WHICHEVER IS THE LESSER AMOUNT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITATION DOES NOT APPLY TO ANY CLAIMS FOR PERSONAL INJURY. THIS AGREEMENT AND ANY CLAIMS AND DISPUTES BETWEEN THE
PARTIES SHALL BE GOVERNED BY AND SUBJECT TO THE INTERNAL LAWS (EXCLUSIVE OF THE CONFLICTS OF LAW PROVISIONS) AND DECISIONS
OF THE COURTS OF THE STATE OF ILLINOIS. THE EXCLUSIVE VENUE AND JURISDICTION FOR ALL CLAIMS AND DISPUTES SHALL BE THE STATE
OR FEDERAL COURT LOCATED IN SCHAUMBURG, ILLINOIS.
Aero Products International, Inc. neither assumes nor authorizes any representative or other person to assume any obligation or liability other than those
expressly set forth herein.
©2007 Aero Products International, Inc. USA
All rights reserved.
1834 Walden Office Square, Suite 300
Schaumburg, IL 60173 USA www.aerobed.com
Made in China. This product may be covered under one or more of the following U.S. and/or foreign patents: U.S. Pat. Nos. 4,977,633; 5,267, 363; 5,367, 726;
6,237, 621; 6,508, 264; 6,598,626; 6,701,559; 6,755,208; 6,986,360; 6,996,867; 7,025,576; 7,039,972; D464,225; D490,635; D513,145; CN 1809683.2; RU
2271129; SG93011; EP 0 487 641; DE 69024962.4;EP 0 947 152; DE 69233298.7; EP 0 605 624; DE 69230797.4; JP 3,419,774; TW 62301; AU 731613; BR
P19710873-1; CN 97196557.9; HK 1025374; MX 216898; NZ 334203; SG 61207; JP 2010828; EP 1 359 325. Other U.S. and foreign patents pending.
If trouble persists, or you have any questions regarding your new Aero® product, please call our Customer Service Department below.
Our Customer Service Department is available Monday-Friday, 9AM to 5PM Central Standard Time.
Please call us toll free at 1-888-462-4468. Canada: 1-888-702-8281