CatEye MSC 3Dx - Manual (Page 30)

30 MSC-3Dx
Display functions (Icon) Range Standard accuracy
Upper display Current speed 0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]
±
0.5 mph (under 31mph)
Cadence 0(20) - 299 rpm
±
1 rpm
Clock time 1:00 - 12:59 [0:00 - 23:59]
±
0.003%
Speed icon Illuminates when Current Speed is selected.
Cadence icon Illuminates when Cadence is selected.
Clock time icon Illuminates when Clock Time is selected.
Center display Heart rate 0 - 299 bpm
±
1 bpm
Heart rate icon Blinks when the heart rate signal is received.
Record memory icon Illuminates when the record memory feature is activated.
Auto icon Illuminates when the Auto Time (automatic start/stop) feature is activated.
Alarm icon Illuminates when the alarm for heart rate target zone is operated.
Used memory icon Illuminates when using record memory rate (%) is indicated on display.
Wheel circumference icon Displays the wheel circumference currently active.
Lower display Elapsed time 0:00'00" - 9:59'59"
±
0.003%
Maximum heart rate 0(20) - 299 bpm
±
1 bpm
Clock time 1:00 - 12:59 [0:00 - 23:59]
±
0.003%
Cadence 0 - 299 rpm
±
1 rpm
Current speed 0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]
±
0.5 mph (under 31 mph)
Lap count LP-00 - LP-50 (Lap Feature)
Average speed 0.0 - 65.9 mph [0.0 - 105.9 km/h]
±
0.5 mph
Maximum speed 0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9k m/h]
±
0.5 mph (under 31 mph)
Trip distance 0.00 - 999.99 mile [km]
±
0.01 mile (under 31 mph)
Total distance 0.0 - 9999.9 / 10000 - 99999 mile [km]
±
0.1/1 mile (under 31 mph)
Zone remaining time 0.00'00" - 9.59'59" ± 1"
Pace icon Displays whether the speed is higher or lower than the average speed. (Pace Feature)
Additional features Heart rate target zone Heart rate range is divided into 4 zones and Time In Pulse Zone is measured and saved
(Alarm may be set in each zone).
Memory Record feature Saves measurement data for 5 files or maximum 2,560 points (Memory Record Interval
timing may be selected from 5, 15, 30 or 60 sec.).
Lap feature Saves for a maximum 50 points (Minimum interval: 5 sec.).
Others Power saving feature (Auto reset upon receipt of speed sensor signal or forced reset by
button operation).
Download saved data to a PC (Optional download kit is required).
*1
Control system: 4-bit one-chip microcomputer, crystal oscillator
Display system: Liquid crystal display (equipped with the LED backlight)
Speed (Cadence) signal detection system: Noncontact magnetic sensor
Heart rate signal transfer system: Wireless signal simultaneous transfer (Transmission distance: Approx. 90 cm)
Operating temperature range: 32
°
F - 104
°
F [0
°
C - 40
°
C] (Can be used below 0
°
with slower screen response.)
Storage temperature range: –4
°
F - 122
°
F [–20
°
C - 50
°
C]
Wheel circumference set range: 10 - 3000mm / A/B switching method, initial value: A-2096, B-2050
Applicable pipe diameter: 11Ш - 36Ш
Length of Wire: Speed sensor: 70 cm Cadence sensor: 120 cm
Power supply/battery life: Pre-installed batteries are for primarily for factory testing purpose. Their life may be shorter than replacement batteries.
Normal battery life as follows:
Main unit:
CR2032 x 1 / approx. 2 years (When using 1 hour/day)
Heart rate sensor: CR2032 x 1 / approx. 2 years (When attaching to body 1 hour/day)
Dimensions/Weight: Main unit: 1-13/16" x 2-1/16" x 19/32" [46.0 x 52.5 x 14.4 mm] / 1.52 oz. [43 grams]
Heart rate sensor: 13" x 1-7/16" x 19/32" [330 x 36 x 15 mm] / 2.19 oz [62 grams]
Designs and specifications are subject to change without notice, due to modifications or improvements.
*1) Windows 95 or Windows 98 required; RS232C (serial port) needed
SPECIFICATIONS