Cencorp 1300 FA – FINAL ASSEMBLY PLATFORM - Manual (Page 2)

The Cencorp 1300 FA cell is a heavy duty
production platform with standard operating
software and graphical user inteface. This
flexible platform can easily be configured
for a wide range of light assembly and
part handling applications in both high
volumelow mix and in low volume–high mix
environments. By starting with a proven
platform, custom solutions are delivered wit
lower cost, less technical risk, and shorter
delivery time when compared to ground-up
automation development.
Equipped with state-of theart industrial
robots, the 1300 FA meets the most
demanding requirements for speed and
accuracy. Three different robot arms are
available depending on the application need.
All the robots are roof mounted allowing
a large working area for the utilization of
process heads, application units, feeders and
transport systems.
The 1300 FA has been designed for heavy
24/7 utilization. This workhorse system allows
Cencorp customers to improve manufacturing
competitiveness through increased capacity,
Application Experts
Flexible Platform
Process specific applications are built using
Cencorp’s huge application module library
and by integrating process units from 3rd
party experts. The 1300 FA can be configued
both as an stand-alone process unit or linked
together with conveyors in a turnkey assembly
line. By using proven process modules and a
standard platform, Cencorp is able to deliver
cusomized solutions with minimal technal risk
and maximum ROI. Thirty years experience and
expertise in automation, assembly processes,
and manufacturing strategies, makes Cencorp a
valued partner for our customers. With more than
30 years of experience with automation in the
electronics assembly and other related industries,
Cencorp is your trusted partner for automated
assembly and part handling solutions.
• Conveyor modules - pallet, pcb, tray, flat-belt
• Grippers - servo, pneumtic, vacuum
• Laser systems - marking, welding, cutting
• Feeders – tube, tray, bowl, tape-and-reel
• Screw driving
• Dispensing
• Vision inspection
• Box handling and packing
Application Library (partial list) Developing new products?
Automation is not always easy and straight forward.
Excellent results can however be achieved when
automation is considered early during the R&D
phase. Cencorp offers DFA (design for automation)
consulting services as an added benefit to our
customers. With a collaborative effort, automation
projects are handled so that our customer’s success
is guaranteed.
RS4-551 Spider Robots
Playload
Applications
Typical Processes
C3-A601 6-axis G6-551 Scara
Nominal 1kg, max 3kg
All fast processes with vertical
assembly and part handling directions
Light assembly
Sorting
Nominal 1kg, max 3kg
Used to achieve more flexibility with-
out adding product specific modules
Complex assembly
Glue dispensing (complex patterns)
Nominal 3kg, max 6kg
Used when product weight
exceeds RS4 payload
Medium weight part handling
and assembly
Test handling
Packing
Part handling where rotation is
required
Screw driving
reduced labor, improved quality and production
control. When combined with Cencorp line control
software, Cencorp production lines are capable of
true “lot size of one” flexible production.