COOK Laboratory Exhaust - Manual

Rigging and Installation Instructions for Single Piece
and Multiple Piece Energy Recovery Plenums
Due to the custom design and build nature of Loren Cook equipment these
instructions are given as general information and are not model specific.
This discussion is broken down into five separate sections of consideration for setting a
single or multiple piece Energy Recovery Plenum. These five areas are as follows:
Section 1.0: Pre-Lift considerations
Section 2.0: Receiving of the equipment
Section 3.0: Rigging of the equipment
Section 4.0: Assembly of the sections
Section 5.0: Finish work for the Installation
Section 6.0: Installation of Extended Exhaust Porch
Section 7.0: Recommended Tools