Custom Brackets RF-PRO (Rapid Fire) - Manual

Flash rotator
Fold-out leg
Must be completely folded
in or out to rotate flash
Captive upright
lock knob
phone: 440.446.0819
toll free: 800.530.2289
website: www.custombrackets.com
email: [email protected]
32 Alpha Park
Cleveland, Ohio 44143
RF-PRO (Rapid Fire) INSTRUCTIONS
Made in U S A Innovative Camera Mount Accessories
Shown with
short camera
Captive flash screw
“D” clip stainless steel
1/4” x 20 thread
Camera position holes (2)
for positioning camera
front to back
Flash anti-twist (2)
Shown with
tall camera
Parts of the RF-PRO
Camera Anti-Twist (2)
Adjustable front to back
Connector Mounting Hole
For accessories RF-C1, RF-C2, RF-C3
Camera plate position holes (5)
for positioning camera
left to right
Upright screw
on backside
Camera screw
“D” style stainless steel
1/4” x 20 thread
Tripod hole
1/4” x 20 thread
Backside of
bracket shown
Strap slot
Camera plate
Refer to instructions included with accessory for attaching to bracket
RF-WT Locking shoe mount with anti-twist for
wireless flash operation
WFM-1 Locking shoe mount with anti-twist for
wireless transmitters
RF-CB Bottom tripod quick release plate
(Custom Brackets style)
Optional Accessories - Sold Separately
Attaching the bracket to a tripod or monopod
Attach the RF-PRO to a tripod / monopod’s 1/4”-20 mounting stud and tighten until firmly attached.
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any defect in material or
workmanship. Warranty does not cover repairs due to customer abuse, negligence, impact or any modifications made by the customer.
Warranty service is available by returning the RF-PRO (shipping prepaid) to Custom Brackets. All returns must include a return authorization
(RA) number (contact Custom Brackets to obtain), letter explaining the problem, and a copy of the sales receipt.
Repair service is available by returning the RF-PRO (shipping prepaid) to Custom Brackets. All returns must include a return authorization
(RA) number (contact Custom Brackets to obtain), letter explaining the problem, and a copy of the sales receipt. A repair cost will be issued
and must be approved prior to any repairs. Shipping charges are the responsibility of the customer.
The only maintenance necessary on the RF-PRO is to clean the inside track of the rotator (back side) periodically with a clean cloth and
WD-40 to remove any dust or dirt that may have accumulated to keep it working at it’s best. The rotation tension is factory set. Attempting
to adjust the tension will void the warranty and may result in damage to the camera, lens or flash.
USA 5 Year Warranty
Repair
Maintenance
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any defect in material or
workmanship. Warranty does not cover repairs due to customer abuse, negligence, impact or any modifications made by the customer.
Limitation to the warranty - after one year shipping charges are not covered. Warranty service is available by returning the RF-PRO
(shipping prepaid) to Custom Brackets. All returns must include a return authorization (RA) number (contact Custom Brackets to obtain),
letter explaining the problem, and a copy of the sales receipt.
International 5 Year Limited Warranty
RF-C1 Connector for Spider Camera Holster ™ - Carry Speed ™
RF-C2 Connector for Black Rapid ™ ConnectR
RF-C3 Connector for Sun Sniper ™ - Custom SLR ™ - Joby ™
Folding the bracket for storage
Remove your camera and flash prior to storage. It is not necessary to remove a flash cord if attached to the flash
mounting plate. Loosen the upright lock knob and rotate upright backward to lower until flat. Fold in the leg.
Note:
The upright knob may be tightened when the bracket is in the storage (flat) position. The upright lock knob must
be loosened prior to rotating the upright or damage may occur and warranty will be void.
Upright lock knob
Bracket in
storage position
Fold-out leg
Flash rotator
base
Upright