EXONIC EXD 6505 - Manual (Page 32)

Bluetooth Operation
Bluetooth Car Kit User Manual
-32-
1). Place the Car Kit and mobile handset
in 3 meters apart.
3). Set your bluetooth phone to
“discover” the Car Kit .
Following your phone’s instruction
guide for details, active your mobile
handset’s Bluetooth function, the
handset will search for accessible
Bluetooth devices.
4). Your phone will find this Car Kit .
Select this Car Kit from the list.
5). “8888”
“PAIR OK”
Enter passkey , then press
“ ” to pair the Car Kit and the handset,
the word , will display in the
TFT .
OK
1). If the pairing can not be completed
within approximately 2 minutes , whiles
the pairing mode is activated, and you
will need to reattempt pairing
(See steps 2-5 above) .
2). After pairing is completed, if the
ICON is stilling flash on the TFT ,
please follow the steps to reattempt
pairing through your handset until the
ICON remains solid on the screen.
Important:
2. Using The Bluetooth Car Kit.
Once connecting is complete, you may
access the following function. Some of
the below mentioned functions only
accessible for handset supported with
hands-free profile.
6). “CONNECT” Select the from the list
on the phone, if you connect success-
fully , the
ICON remains solid on
the screen , then you can operate the
function of blue-tooth about the unite .
1. “Pair” To Your Bluetooth Phone
Prior to using the Car Kit for the fist time,
you must pair it with a Bluetooth-enabled
mobile handset.
The following steps describes pairing
the instruction for a typical Bluetooth-
enabled mobile handset.
Touch the touch screen , the touch
operation menu will display.
Touch the “
” section to select ,
it will display following as below :
TITLE
DVD 1-0:00:16
AUDIO ZOOM SUBTITLE
PAIR DIAL REDIAL
DSP OSD
FLAT
DISC-IN
12: 16
Touch to select
2). Put the Car Kit in pairing mode.
POWER
“PAIR/ ”
“BLUETOOTH
PAIRING ”
a Press the button to turn ON,
the ICON will flash on the TFT .
b. Touch the screen of “ ” range
or press the on the remote
control until the word
display, it’s now ready
for pairing.
.
PAIR
“ ” and “ ” serves as
the “ ” and “ ” button on your
mobile handset .
Please note :
When you dial the wrong number,
you can touch the screen to
delete the wrong number . (You can also
press the “
” button on the remote
control to do so .)
Note:
“ CLEAR ”
Touch the screen of “ ” range,
(or press briefly the button
on the remote control ) the word
will display on the TFT .
then you can touch the number section
on screen (or dial the number buttons on
the remote control ), and then touch the
“
” section or press
button to confirm .
“ PAIR/ ”
“DIAL NUMBERS”
“ PAIR/ ”
Make a call
DIAL
DIAL