Wire belt feeder base (if equipped), Tools instructions, Feeder cover – Nieco JF63-BG User Manual
Page 17
Advertising
17
Nieco Corporation - Model JF63-BG
1.
Pull the release pin.
2. Lift wire belt feeder bases up and off.
3. Wash, rinse, and sanitize in the 3-compartment
sink.
REASSEMBLY: Pull the release pin and place feeder
base in position.
Wire Belt Feeder Base (If equipped)
Feed End
Tools
Instructions
3-Compartment Sink
Clean: Every 4 hours
Scrub Pad
1. Slide the feeder cover towards you until it comes
off.
2. Wash, rinse, and sanitize in the 3-compartment
sink.
Feeder Cover
Feed End
Tools
Instructions
3-Compartment Sink
Clean: Every 4 hours
Scrub Pad
Advertising