Axis Communications BLADE VIDEO SERVER AXIS 243Q - Manual (Page 4)

Page 4 AXIS 243Q Blade Installation Guide
Hardware overview
AXIS 243Q Blade Video
Server
DIP Switches - Each video
input has a corresponding line
termination DIP switch. Axis
blade video servers are supplied
with the line termination
enabled for each input; that is,
with the DIP switches set to ON
(down position).
To connect the video input in
parallel with other equipment,
disable the input termination
by setting the corresponding
DIP switch to OFF (Up posi-
tion). Failure to do so may
affect the image quality nega-
tively.
Bus Connector - This is the
physical interface to the video
server rack, providing power,
network and the I/O terminal
connector.
Control Button - This button is
used to reset the video server to
the factory default settings. See
page 9.
Video Inputs - The AXIS 243Q
Blade supports 4 video sources
(VIDEO 1 - VIDEO 4). Each
video input is terminated using
a coax/BNC connector.
Physical connections made
using 75 Ohm coaxial video
cable have a recommended
maximum length of 800 feet
(250 meters).
Bus
Connector
DIP Switches
Control button
LED Indicators
Video inputs 1-4
Serial number
label