Pulsafeeder PulsaPro 900 EN - Manual (Page 2)

ii
PulsaPro Series Guarantee
Should you experience a problem with your Pulsafeeder pump, first consult the troubleshooting
guide in your operation and maintenance manual. If the problem cannot be solved, please contact
your local Pulsafeeder Sales Representative, or our Technical Services Department for further
assistance.
Trained technicians are available to diagnose your problem and arrange a solution. Solutions
may include purchase of replacement parts or returning the unit to the factory for inspection and
repair. All returns require a Return Authorization number to be issued by Pulsafeeder. Parts
purchased to correct a warranty issue may be credited after an examination of original parts by
Pulsafeeder. Warranty parts returned as defective which test good will be sent back freight
collect. No credit will be issued on any replacement electronic parts.
Any modifications or out-of-warranty repairs will be subject to bench fees and costs associated
with replacement parts.
In addition, Pulsafeeder guarantees its
PulsaPro
Series drive assemblies for a period of five
years from the date of shipment. All other material and workmanship are fully covered for a
period of one year. Any parts found to be defective within the above time span will be replaced
free of charge, F.O.B. our factory.
Equipment or accessories manufactured by others but purchased through Pulsafeeder, such as
electric motors, are guaranteed only to the extent of the original manufacturer.
Damages incurred from misuse, abuse, and/or improper protection during storage will be cause to
void this guarantee. Erosion, corrosion, or improper application of the equipment or related
piping by the buyer or any third party is also excluded.
The above guarantee is in lieu of any other guarantee, either expressed or implied. We make no
warranty of fitness or merchantability. No agent of ours is authorized to make any warranty other
than the above.
Safety Considerations:
1. Read and understand all related instructions and documentation before attempting to install or
maintain this equipment
2. Observe all special instructions, notes, and cautions.
3. Act with care and exercise good common sense and judgment during all installation, adjustment,
and maintenance procedures.
4. Ensure that all safety and work procedures and standards that are applicable to your company and
facility are followed during the installation, maintenance, and operation of this equipment.
Copyright ©2009 Pulsafeeder, Inc. All rights reserved.
Information in this document is subject to change without notice. No part of this publication may be
reproduced, stored in a retrieval system or transmitted in any form or any means electronic or mechanical,
including photocopying and recording for any purpose other than the purchaser’s personal use without the
written permission of Pulsafeeder, Inc.