Pulsafeeder Pulsar ECA NEMA4X User Manual
Pulsar, Eca nema type 4x
Advertising
Table of contents
Document Outline
- Conventions
- For the remainder of this bulletin, the following conventions are in effect.
- 1. INTRODUCTION
- 2. FOREWORD
- 3. SAFETY CONSIDERATIONS
- Attempts to disassemble, modify or tamper in general by unauthorized personnel will void the guarantee and will release Pulsafeeder, Inc. from any liability for damage caused to persons or property resulting from such actions.
- DO NOT PERFORM ANY WORK ON THE PUMP, MOTOR OR ECA CONTROL UNIT WITH ELECTRICAL POWER CONNECTED TO THE ECA CONTROL UNIT. DO NOT OPERATE ECA UNIT WITH THE COVER REMOVED. DANGER OF ELECTRONIC SHOCK AND MECHANICAL PINCH HAZARD!
- INSTALLATION AND REPAIRS SHOULD ONLY BE PERFORMED BY AUTHORIZED PERSONNEL!
- 4. TRANSPORT AND STORAGE
- 5. STORAGE INSTRUCTIONS
- 6. INSTALLATION AND WIRING
- 7. START UP AND OPERATION
- 8. INPUT/OUT SETUP
- 9. MECHANICAL ZERO CALIBRATION
- 10. DIAGNOSTICS
- 11. SPECIFICATIONS
- 12. POWER-UP OPTIONS SUMMARY
- 13. FIELD WIRING SUMMARY
- 14. TROUBLESHOOTING GUIDE
- 15. MAINTENANCE & SPARE PARTS
- All maintenance work must be carried out only when the ECA and connected equipment is stopped and disconnected from mains supply (including auxiliary circuits). Maintaining original characteristics over time must be ensured by an efficient maintenance...