Audiovox VOH704 - Manual (Page 8)

-8-
128-6423
8 of 16
9. SKIP/SEARCH BUTTON
This button selects between SKIP and SEARCH
mode. In “SKIP mode” the TV only stops on
channels that are programmed into memory when
the CHANNEL UP/DOWN buttons are used.
When the SKIP mode is off, the TV will stop on
all active channels.
10. ERASE/WRITE BUTTON
When tuned to a channel press this button to store
or erase the channel from memory. The stored
channel numbers are displayed in “GREEN” on
the screen and the non-stored channel numbers
are in “RED”. When the skip mode is on, the
VOH703 will tune to only the stored channels when
using the CHANNEL UP/DOWN buttons.
Remote Controlled VCP Functions
These features can only be used with an Audiovox
Video Cassette Player, if this option was installed with
your video package.
11. POWER BUTTON
This button is used to turn the VCP on and
off.
12. “REW” REWIND BUTTON
If this button is pushed while the tape is stopped,
the tape will rewind. If this button is pushed while
the tape is playing, the VCP will go into rewind
search mode. For more information consult the
Audiovox VCP Owner’s Manual.
13. PLAY BUTTON
Press this button to activate play mode while a
tape is loaded into the VCP. This button may also
be used to disengage search and pause modes.
For more information, consult the VCP owner’s
manual.
14. “F.FWD.” FAST FORWARD BUTTON
If this button is pushed while the tape is stopped,
tape will fast forward. If this button is pushed while
the tape is playing, the VCP will go into fast forward
search mode. For more information on the
search feature of the VCP, consult the VCP
owner’s manual.
15. REPLAY BUTTON
Pressing this button will rewind tape and
immediately begin playback when the tape is fully
rewound.
16. STOP BUTTON
Press this button to stop the tape.