Addtron Technology Mercury Hub PR0018 - Manual (Page 3)

Mercury 6-5 M/E Installation guide
Mercury Hub User Guide
The Mercury Hub
From Resource Data Management
Description
The Mercury Hub is a device that allows up to 10 RDM controllers to be connected to an IP network, with out
the need for individual IP Futura modules. The Hub can be mains powered, or powered from 2 connected
Mercury controllers. There are 10 RS232 connections for linking to Mercury controllers, 2 standard ethernet
hub (10baseT) connections for other network devices and a dedicated ethernet Uplink port.
Front View
Mains connector
10 x RS232 Ports for direct connection to RDM controllers
Ports 1 & 2 are used to power the Hub in the non-mains version
Rear View
2 x IP ports
Uplink IP port
Ensure that all power is
switched off before
installing or maintaining
this product
Revision 1.5 Page 3 of 6