Vaddio ProductionVIEW Super Joystick - Manual (Page 11)

ProductionVIEW Super Joystick
ProductionVIEW Super Joystick Manual 341-565 Rev. B Page 11 of 16
System Menu (continued)
>Clear Memory
>Select
>Start
Clears the camera preset memories and sets all parameters to default settings
>Clear Presets
>Select
>Start
Clears the camera preset memory only
>Serial Info
>Select
>On
or Off
Reports button pushes on front panel out the serial port (default is off)
(Does not report joy stick position)
>Power Up Preset
>Select
>Home
Camera
>Select - Upon power up, all cameras will go to their home position
>Preset
12
> Select - Upon power up, all cameras will go to Preset 12
>Preset Location
>Select
>All
Local
>6 InCam 6 Local
In “All Local” mode, the ProductionVIEW stores all 12 presets internally.
In “6 InCam 6 Local” mode, the presets 1 through 6 will be stored in the cameras.
Presets 7 through 12 will be stored in the ProductionVIEW.
Note: The “6 InCam 6 Local” mode allows for switching video sources when cameras are
moving to preset locations. Since Presets are stored in Camera, the system does not have
to wait for position feedback before allowing another command to be entered.
>Return to Main
>Select
Returns to Main Menu item (System Menu)
General Specifications:
ProductionVIEW Super Joystick
System Part Numbers 999-5300-000 North America (North American AC Cord Set)
999-5300-001 International (Euro and UK AC Cord Set)
System I/O Six (6) RS-232 Camera Control Ports on RJ-45 Connectors
One (1) Master RS-232 Control Port on DB-9F
Six (6) External Control A (Preview) Triggers/Tally on Phoenix Type Connectors
Six (6) External Control B (Main) Triggers/Tally on Phoenix Type Connectors
One (1) Ext. Video A (Preview) Input on BNC Connector
One (1) Ext. Video B (Main) Input on BNC Connector
One (1) Power Connector (Coaxial, Positive Center, 5.5mm OD x 2.5mm ID)
Joystick 3-Axis, Hall Effect, Non-contacting type
LCD Monitor 4” (101.6mm) Active Matrix with 960 x 234 Resolution
LCD Display 2-Line Back-lit Display
Internally Stored Presets 72 (12 per PTZ camera attached) 2 modes
Local Mode
- All 12 Presets are stored in the ProductionVIEW
6 In Camera - 6 Local - The presets 1 through 6 are stored in the camera allowing for
quicker camera switching on those presets. Presets 7 through 12 are stored internally in
the Supper Joystick
Camera Control Parameters Brightness, Focus, AWB (auto white balance) and BLC (back light compensation)
Power Supply 18 VDC 2.75 Amp
Weight 7lbs/3.175kg
Dimensions (H x W x D):
4” (10.2cm) x 16” (40.6cm) x 10” (25.4cm)