Avaya P333T-PWR - Manual (Page 8)

Before you Start
6 Quick Start for Hardware Installation: P333T-PWR Stackable Switch
Preparing Installation Files
Ensure that you load the latest versions of the firmware file for the P333R. You can download
the firmware file needed for your installation from the Avaya Support Web site, at
http://
support.avaya.com .
Preparing Needed Tools
Prepare the tools you need to mount the P333T-PWR according to the Table 1 :
Choosing the Installation Site
Ensure that the location where you install your P333T-PWR fulfills the following requirements:
● Cables are away from sources of electrical noise such as:
● radio transmitters
● broadcast amplifiers
● power lines
● fluorescent light fixtures
● Water or moisture cannot enter the chassis.
● Air can flow freely around all sides of the chassis.
● The vents on the sides of the chassis are not blocked.
Table 1: Mounting Tools
If you need to mount on... Prepare these tools
Rack Phillips head screwdriver