Vaddio Quick-Connect DVI-HDMI SR - Manual (Page 5)

Quick-Connect DVI/HDMI - SR Interface
©2010 Vaddio - All Rights Reserved. Quick-Connect DVI - SR Interface, Document Number 342-0045 Rev. A Page 5 of 12
Unpacking System Configurations (continued)
WallVIEW DVI/HDMI HD-18 System,
Part Number 999-6906-001 International - Black Camera Kit
Part Number 999-6906-001W International - White Camera Kit
• One (1) HD-18 PTZ Camera 999-6900-001 (Black) or 999-6900-001W (White)
• One (1) Quick-Connect DVI/HDMI Interface Box
• One (1) 24VDC, 2Amp Switching Power
• One (1) AC Cord Set for Euro and One (1) AC Cord Set for UK
• One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice before
screwing stripped wire ends to 3 conductor Molex Euro Jack)
• Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded DVI
Cable at the Quick-Connect DVI end)
• One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded
DVI Cable at the Monitor end).
• One (1) 535-2000-230 Thin Profile Wall Mount with mounting hardware - Four (4) EZ Anchors with Four (4)
screws and two (2) ¼”-20 x ½” Screws
• One (1) 998-1001-232 Control Adapter (for control systems)
• One (1) 998-1002-232 Control Adapter (for TANDBERG VC systems)
• One (1) 3-pos Phoenix type connector
• User Manual - Document Number 342-0045
Quick-Connect DVI/HDMI – SR Interface I/O Description
Connectors:
1) Vaddio Blue LED Power Indicator: Illuminates when the 24 VDC Power supply is plugged in.
2) Power Port: 24 VDC, 2.0 Amp Power Connection, 5.5mm OD x 2.5mm ID, Positive Center
3) RS-232 Control Input: Connect to joystick controller, codec or control system to control the HD-18
Camera.
4) To Camera: RS-232 Control to & from the Camera and IR signals returned from the camera
5) Daisy Chain Control Port: Daisy Chain Control Emulation (DCCE) output to next Quick-Connect
DVI/HDMI for use when daisy chain control lines can’t be avoided.
6) IR Output Port: Non-modulated (for hard connections) and Modulated for use with IR emitters
attached to the front IR windows of the codec to be controlled.
7) DVI-D Output: High Definition Multimedia Interface (HDMI) Transmitter, HDMI (v 1.3 with deep color)
and DVI v 1.0 Compliant
8) YPbPr Output: Analog Component Video Output on DE-15F Connector, Resolutions up to 1080p/60
with monitor support
9) EZCamera Power & HD Video Port: Supplies power to camera and returns HD video from the
camera via Cat-5e. Maximum distance on the CAT-5e cable is 100’ (30.5 m).
① ② ③ ④ ⑤ ⑥ ⑦ ⑨ ⑧