Vaddio Thin Profile Wall Mount Bracket for Polycom VSX Codecs User Manual

Eagleeye and powercam cameras, Installation and user guide

Advertising
background image

©2010 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners.
Document Number 341-547 Rev. B

Installation and User Guide

Vaddio™ Wall Mount Shelf and Thin Profile Camera Mounts for Polycom

®

EagleEye and PowerCam Cameras

Wall Mount Shelf for Polycom® VSX Series Set-Top Codecs - Model Number 535-2000-220
Thin Profile Wall Mount for the Polycom EagleEye High-Resolution Camera - Model Number 535-2000-221
Thin Profile Wall Mount for Polycom PowerCam PTZ Camera - Model Number 535-2000-219













Wall Mount Shelf for VSX Set-top

Series Codecs (535-2000-220)

Thin Profile Wall Mount for EagleEye

Camera (535-2000-221)

Thin Profile Wall Mount for

PowerCam Camera (535-2000-219)






Includes:
ƒ

One (1) Wall Mount Shelf for Polycom
VSX Set-Top Codec (fits VSX-7000,
VSX-6000 and VSX-5000)

ƒ

Four (4) - 800-616 (#8 x 1.25 sheet
metal screws)

ƒ

Four(4) – 800-817 (EZ Anchors – self
drilling wall anchors)

ƒ Install

Guide

ƒ

Can be mounted to 3-gang box

(Codec not included)

Includes:

ƒ

One (1) Thin Profile Wall Mount for
Polycom EagleEye HD Camera

ƒ

Four (4) - 800-616 (#8 x 1.25 sheet
metal screws)

ƒ

Four(4) – 800-817 (EZ Anchors – self
drilling wall anchors)

ƒ

Four (4) M3 x 6mm Screws

ƒ Install

Guide

ƒ

Can be mounted to 2-gang box

(Camera not included)

Includes:

ƒ

One (1) Thin Profile Wall Mount for
Polycom PowerCam
(Camera not included)

ƒ

One (1) ¼”-20 Mounting Screw

ƒ

Four (4) #6 x 1” Sheet Metal Screws

ƒ

Four (4) Conical Wall Anchors

ƒ Install

Guide

ƒ

Can be mounted to 2-gang box

(Camera not included)

MOUNTING THE CODEC/CAMERA:

The Thin Profile Wall Mounts for the Polycom EagleEye and PowerCam can be mounted to an electrical wall box or mounted directly to a
drywall surface with the supplied wall anchors or other spiral type wall anchors of the Integrator’s choice. The Wall Mount Shelf for the VSX
Codec can be mounted to a 3-gang wall box or mounted directly to a drywall surface as well. Note: When locating the camera, consider
viewing angles, lighting conditions, line of site obstructions and check for in-wall obstructions where the camera is to be mounted. Pick a
location to optimize the performance of the camera. The integrator is responsible for attaching the camera/codec to the mount securely.

INTENDED USE:

These products were designed, built and tested for use indoors and to support the weight, size and shape of the prescribed products only.
Using these mounts for any other devices could damage that device and/or create potentially unsafe operating conditions.

HARDWARE WARRANTY:

Please see the Vaddio website at

http://www.vaddio.com

for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of

Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material
Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement
supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the
Vaddio website or through e-mail support at

mailto:[email protected]

.

The Shelf and Wall Mounts can be
mounted directly to the wall with
wall anchors or can be mounted
directly to electrical wall boxes
(see below for wall box sizes).

Most Wall Mounts come with the proper screw(s) to
attach the camera to the mount (not all mounts or
cameras have slots or screws (see below) Note:
The integrator is responsible for attaching the
camera/codec to the mount securely.

90º Opposed slotted
mounting holes for easy
codec/camera leveling

Camera and Electronic Products for Integrators

Rounded corners for
safety and ease of
handling

Durable black powder
coat finish (paintable
to match any décor)

Figure 1:
General Installation Diagram of
EagleEye Mount

Heavy gauge steel construction
for strength and rigidity

Advertising