Vaddio Thin Profile Wall Mount Bracket for LifeSize HD Camera - Manual

©2007 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Vaddio, 4800 Quebec Ave. N.,
Minneapolis, MN 55428, Toll Free: 1-800-572-2011, Main: 763-971-4400, FAX: 763-971-4464. Document Number 341-570 Rev. A
Installation and User Guide
Vaddio™ Thin Profile Wall Mount for the LifeSize HD PTZ Camera
Model Number 535-2000-222
UNPACKING:
Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:
ƒ
One (1) Thin Profile Wall Mount for the LifeSize HD PTZ Camera
(Camera not included)
ƒ One (1) ¼”-20 x ½” Camera Mounting Screw
ƒ Four (4) #6 x 1” Sheet Metal Screws
ƒ Four (4) Conical Wall Anchors
ƒ Documentation
MOUNTING THE CAMERA:
The Thin Profile Wall Mount for the LifeSize HD Camera can be mounted to a 2-gang wall box or mounted directly to a drywall
surface with the supplied wall anchors or other spiral type wall anchors of the integrator’s choice. The slotted mounting holes
are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level. Note: When locating the
camera, consider viewing angles, lighting conditions, possible line of site obstructions and check for in-wall obstructions where
the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.
INTENDED USE:
This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the
LifeSize HD Camera only. Using this mount for any other device could damage that device and/or create a potentially unsafe
operating condition.
HARDWARE WARRANTY:
Please see the Vaddio website at
http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The
Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service,
Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under
Warranty. The Vaddio Warranty Statement supercedes all other published warranty statements in content and coverages.
Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at
mailto:[email protected] .
¼”-20 mounting screw & lock washer to
secure camera to the mount (not all mounts
or cameras have this slot for a ¼”-20
screw). Note: The integrator is responsible
for attaching the camera to the mount
securely.
90º Opposed slotted
mounting holes for easy
camera leveling
Camera and Electronic Products for Integrators
Rounded corners for
safety and ease of
handling
Durable black powder
coat finish (paintable to
match any décor)
Figure 1:
General Installation Diagram
Thin Profile Wall Mount can
be mounted directly to the
wall with wall anchors or
can be mounted directly to
a 2-gang electrical wall box.
Figure 2:
Thin Profile Wall
Mount for LifeSize
PTZ Camera