Vaddio Thin Profile Wall Mount for Polycom EagleEye IV Camera - Manual

©2014 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Pricing and specifications are subject to change without
notice or obligation. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll Free: 800-572-2011, Main: 763-
971-4400, FAX: 763-971-4464, SD: 68152.5. Document Number 342-0788 Rev A
Vaddio™ Thin Profile Wall Mount for the Polycom ®
EagleEye IV Camera
Part Number: 535-2000-242
UNPACKING:
Carefully remove the product from the packaging and identify the following parts:
 One (1) Thin Profile Mount for EagleEye IV (camera not included)
 Four (4) M3 x 6mm Black Mounting Screws
 Four (4) #8 x 1.25” Sheet Metal Screws
 Four (4) Self-Drilling Wall Anchors
 Manual
MOUNTING THE CAMERA:
The Thin Profile Wall Mount for the Polycom EagleEye IV camera can be mounted to a 2-gang wall electrical wall box or be mounted
directly to a drywall surface with the supplied wall anchors or other spiral type wall anchors of the integrator’s choice. The slotted mounting
holes are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level. When locating the camera,
consider viewing angles, lighting conditions, possible line of site obstructions and check for in-wall obstructions where the camera is to
be mounted. Always pick a mounting location to optimize the performance of the camera. Dimensional drawings (DWG and PDF) are
available at vaddio.com.
INTENDED USE:
This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Polycom
EagleEye IV PTZ camera only. Using this wall mount for any other purpose could create a potentially unsafe operating condition, really.
HARDWARE WARRANTY:
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement
of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return
Material Authorizations (RMA), Voided Warranty, Shipping, Handling and Products Not Under Warranty. The Vaddio Warranty Statement
supercedes all other published warranty statements heretofore in content and coverages. Vaddio Technical Support can be contacted
through the Vaddio website or through e-mail support at
mailto:[email protected] .
Mounts to a 2-gang
electrical box or directly
to drywall with provided
wall anchors
Heavy-duty 12-gauge
steel construction
Four (4) M3 mounting screws
(provided) attach the EagleEye IV
camera to mount
Rectangular slot in
platform and back plate
for mini HDCI connector
Front radius matches
the contour of the
EagleEye IV camera
base.
Durable black powder
coat finish (paintable
to match any décor).
I NSTALLATION AND U SER G UIDE
Installation and User Guide
EagleEye IV Camera on Wall Mount.
(Camera not included with wall mount.)
Slotted mounting holes
are 90º opposed for
easy camera/mount
leveling.