Vaddio WallVIEW CCU HD1 - Manual

Installation and User Guide
Camera and Electronic Products for Integrators
©2008 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and
pricing subject to change. Vaddio, WallVIEW, HSDS, Quick-Connect, EZIM, ProductionVIEW, PreVIEW, EZCamera and PowerRite are
registered trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 341-719 Rev. D
W
ALL
VIEW™ CCU HD1
WITH HSDS™
Vaddio™ Quick-Connect™ CCU for
the Sony® EVI-HD1 PTZ Camera
OVERVIEW
The Vaddio WallVIEW Quick-Connect CCU (Figure 1) is built
around the Sony EVI-HD1 high definition PTZ Camera. The
WallVIEW Quick-Connect CCU HD1 allows the user to control
the color output of the camera’s image sensor, through both
Red and Blue Gain knobs, as well as Iris and Gain levels and
Aperture, to provide a higher quality image. The system uses
high speed differential signaling (HSDS), an active
transmission system that delivers low-loss, high-quality video
over Cat. 5 cabling distances up to 500 feet. The WallVIEW
Quick-Connect CCU HD1 system is capable of high definition
(HD) or standard definition (SD) resolutions in a variety of
screen configurations to fit most monitors. The EVI-HD1 is
capable of either NTSC or PAL formats.
Other features on the CCU include the ability to store settings on two discrete Scene buttons, and buttons for
Auto White Balance, One Push White Balance and Auto Iris. Like all Vaddio WallVIEW systems, the wall
mount and mounting hardware is included.
INTENDED USE
Before installing the Vaddio WallVIEW CCU Camera System, please read the entire manual thoroughly. All
Vaddio camera systems are designed for use indoors. Outdoor operation is not recommended, has not been
tested, and could damage the camera and/or create a potentially unsafe operating condition. Use only the
Vaddio PowerRite power supply provided.
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you install the Vaddio WallVIEW CCU system. For
reference, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the website. These documents can be downloaded from
www.vaddio.com free of charge.
IMPORTANT SAFEGUARDS
Read and understand all instructions before using. Do not operate any electrical device if it has been
dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid
conditions.
INFORMATION
For RS-232 control information, please see the full-length Technical Manual for the SONY EVI-HD1. This
manual can be found either on the Vaddio or Sony website. Vaddio has also prepared a number of
TechNotes, specifications and drawings designed to inform and educate integrators on the value and the
specific uses of Vaddio products.
Figure 1:
WallVIEW CCU HD1 System with
Camera, Wall Mount and EZIM CCU
Use only the power supply provided with the Vaddio WallVIEW products.
Use of any unauthorized power supply will void any and all warranties.