Vaddio WallVIEW HD-USB SR User Manual

Page 5

Advertising

WallVIEW HD-USB SR Camera System

WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D

Page 5 of 40

Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.

Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com

free of charge.

NPACKING

North American Version 999-6994-000
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:



One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)



One (1) Vaddio IR Remote Commander



One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)



One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply



One (1) AC Cord Set for North America



One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable



One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable



One (1) 20m (65’) Active, Port Powered USB 2.0 Extension Cable



One (1) Power Extension Module



One (1) 24 VDC, 2.

08 Amp PowerRite™ Switching Power Supply



One (1) AC Cord Set for North America



One (1) CONCEAL Mount and Hardware for the HD-USB Camera



Documentation

International Version 999-6994-001
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
