Vaddio WideSHOT WallVIEW USB - Manual (Page 18)

WideSHOT WallVIEW USB System
WideSHOT WallVIEW USB Document Number 342-0696 Rev. B Page 18 of 44
The No Camera Detected window will appear if the Quick-Connect USB has no communication with the camera.
Check the camera power and serial connections if no camera is found within 30 seconds of initialization. The
Quick-Connect USB controls the camera over the serial connection.
Screen Shot: User Menu - Camera Control Page
1) CCU Scenes - Custom A, Custom B and Custom C
There are 3 preset memory locations for scenes configured and stored on the Camera Settings Menu Tab (see
page 20) on the WideSHOT CCU Scenes, under Color Settings. The Admin has control to set up the scenes
and the User can recall these presets by clicking on Custom A, B or C.
2) Preset Lighting Scenes
Six preconfigured lighting presets were set by the technical folks at Vaddio (really…Scott set all the presets) that
are meant to be used in certain lighting conditions or scenarios. These lighting presets include; Automatic,
Incandescent Hi, Incandescent Lo, Fluorescent Hi, Fluorescent Lo and Outdoor (character limitations are why the
names are spelled so gnarly). Set this control to the best setting for the room where the camera is used.
Screen Shot: Admin Log-in
➊
➋