Ayre Acoustics K-5x - Manual (Page 12)

The chosen input is now programmed for “Processor
Pass-Through” operation, disabling the now
redundant volume control of the K-5x. When that
input is selected, the preamplifier section of the
K-5x is set to unity gain (0 dB), and the volume is
controlled directly from the surround-sound
processor. The volume indicator of the K-5x will
display “PP” to show that the “Processor
Pass-Through” mode has been selected for that
input.
To clear the “Processor Pass-Through” mode from
an input and restore normal operation, remove the
AC power from the K-5x for at least 10 seconds.
Then, while pressing the “Mute” button, re-connect
the AC power.
Break-In
100 to 500 hours of music
played through the system will
ensure full break-in.
Due to the manufacturing processes used for the
wires and capacitors, a break-in period is necessary
for the amplifier to reach its full sonic potential.
10