Westwood Design Monterey Convertible Crib - Manual (Page 12)

Toddler Bed Conversion
A. Remove the 6 bolts attaching the footboard to the crib, and remove the footboard.
B. Unscrew the removable feet from the bottom of the footboard, and screw them into the bottom
of the crib sides.
C. Adjust the spring to its lowest position, following the procedure in Step 2.
D. Use the same bolts to attach the guard rail to the crib. Tighten securely using the allen wrench.
E. Insert the allen bolt (P) through the hole in the corner post, and thread it into the cap nut (Q) as
shown. Tighten securely using the allen wrench. Repeat for the other side.
Required Hardware
4 x Allen Bolt, 2” Long (O)
Allen Wrench (R)
Allen Bolt (O)
Removable Foot (C)
Allen Bolt (P)
Cap Nut (Q)
2 x Allen Bolt, 1-1/8” Long (P)
2 x Cap Nut (Q)