Troubleshooting – Wittco 200-2R-BI-C-NA User Manual

Page 9

Advertising
background image

NA DRAWER WARMER

F-41215 (02-14)

8

TROUBLESHOOTING

SYMPTOMS

POSSIBLE CAUSES

REMEDY

Warmer not operating

Warmer not connected to
power source.

Connect cabinet to power
source.

No power

Check Circuit Breaker and/or
check GFCI switch on outlet.

GFCI or Ground Fault
Circuit Indicator tripped

Moisture problem.

Dry moisture problem.

Shorted element

Contact Authorized Service
Provider.

Pinched/damaged wire.

Contact Authorized Service
Provider.

Damaged power cord.

Contact Authorized Service
Provider.

Warmer is connected to
power source, switch is
turned on, but warmer
not heating

Defective: heating element,
thermostat, etc.

Contact Authorized Service
Provider.


SERVICE & PARTS INFORMATION

To obtain Service and Parts information concerning this model, contact WITTCO
Service Department at the address listed on the front cover of this manual or refer to our
website:

www.wittco.com

for a complete listing of Authorized Service and Parts depots.

Customer Service

1-800-367-8413

Technical

Service

1-866-628-0485

Service

Parts 1-866-628-0485

Malibu

Service

0161-874-5400



When calling for service, have the model number and serial number available.


Advertising