For cable modem and dsl users – Airlink101 AR410W User Manual
Page 14
For Cable Modem and DSL Users
Step 1
Power off the Cable/DSL modem, router, and computer and wait for 5 minutes.
Step 2
Turn on the Cable/DSL modem and wait for the lights on the modem to settle down.
Step 3
Turn on the router and wait for the lights on the router to settle down.
Step 4
Turn on the computer.
Step 5
Redo the Setup Wizard.
Step 6
Verify the Connection Status as described in Section 4.
Section 7
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
Section 6
Connecting to the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless network card to the
same settings in order to establish a wireless connection to the router. Please refer to your wireless
network card’s manual on how to configure these settings.
SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Channel #: 6
WEP: disabled
You may need to restart your computer after establishing a signal strength/link quality with the router.