Analog Devices SHARC 82-000197-01 - Manual (Page 19)

SHARC USB EZ-Extender Manual 2-1
2 USB EZ-EXTENDER
HARDWARE REFERENCE
This chapter describes the hardware design of the USB EZ-Extender. The
following topics are covered.
• “System Architecture” on page 2-1
Describes the extension board’s configuration.
• “Processor Select Jumper (JP1)” on page 2-2
Describes the configuration jumper’s functionality.
System Architecture
A block diagram of the SHARC USB EZ-Extender is shown in Figure 2-1 .
Figure 2-1. Block Diagram