A&D Precision Scale UC-324THW - Manual (Page 5)

A&D Medical (Toll-Free): 1-888-726-9966 | Page E-3
Getting Started
Your UC-324THW Wireless Precision Scale will work as a stand-alone
device. To use with Wellness Connected follow the below steps.
Before plugging the ActiLink
™
USB Transceiver into your computer:
1. Go to www.wellnessconnected.com/getstarted
2. Choose the service plan that is best for your needs.
3. Purchase that plan.
4. Download the Wellness Connected software that is appropriate for
your computer.
5. Run the software and follow the installation process.
6. Enter in the required fields (your health information and product
serial numbers).
7. Choose your widgets.
8. Set your goals.
9. Start using Wellness Connected!
Using your UC-324THW Precision Scale
1. Insert batteries and place your scale on a solid,
level floor. You may change between pounds and
kilograms with the Set Switch.
2. Tap the scale with your foot to activate. Wait until
the display reads 0.0 lb (0.0 kg).
3. Step on the scale gently and stand still during
measurement. Your weight is displayed after the
O symbol appears.
4. Step off the scale. The scale automatically
transmits your weight wirelessly if your scale is
within range of an active ActiLink USB transceiver.
If the scale is not in range, the data will be stored
in memory until the scale is activated in range of
an active ActiLink. The UC-324THW can store up
to 63 measurements.
Important note – The ActiLink USB Transceiver will not
work when plugged into a computer in sleep, suspend,
or hibernation mode.
Important note – The range of the UC-324THW may be affected by walls,
materials around or between the UC-324THW and ActiLink, and other
environmental factors.