Acer Altos G300 Series - Manual (Page 108)

5 Configuring IDE Software RAID 96
Using IDE Software RAID Configu-
ration Console
This section describes the IDE Software RAID Configuration Console
software utility. You can use the software utilities that come with IDE
Software RAID configuration console to perform the following actions.
• Get information about the configuration
• Track the health of the array and physical drives
• Track S.M.A.R.T. status of the physical drives
• Rebuild an array
• Perform a consistency check on an array
• Check error log where all drive failures are reported
IDE Software RAID Configuration Console
To log onto the RAID Server, enter the Internet address in the Internet
browser. The following screen displays.
The internet address should be http://localhost:555
aa300.book Page 96 Tuesday, December 17, 2002 5:27 PM