Acer Altos G300 Series - Manual (Page 65)

53
SuperIO Configuration
• Onboard Serial Port 1
Use these items to disable the serial ports or to assign a port
address and IRQ to the ports.
• Onboard Parallel Port
Use this item to disable the parallel port or assign a port address to
the parallel port.
• Parallel Port IRQ
Use this item to determine the IRQ of the parallel port.
• Parallel Port Mode Select
Use this item to determine the mode of the parallel port. You can
select Normal, Bi-directional, EPP (Enhanced Parallel Port) or ECP
(Extended Capabilities Port).
• Parallel Port DMA Channel
These items are not available in most circumstances. If they are
available, use them to allocate DMA (Direct Memory Access)
channel for the parallel port.
Remote Access
Configuration Configure Remote Access.
Parameter Description
SuperIO Chipset Nat414
Advanced
Configure Nat414 Serial Port(s) and Parallel Port
___________________________________________________
Serial Port1 (Address/IRQ) [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port IRQ [7]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [3]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 'Copy right 1985-2000, American Megatrends Inc.
aa300.book Page 53 Tuesday, December 17, 2002 5:27 PM