Advanced Technology VeneerBric User Manual
Page 4
ATI‐VBII
Revision 0
Effective: 11/4/2011
Advanced Technology, Inc
(800) 849‐1320
www.advtechnology.com
Page 4 of 4
CONDITIONS & WARRANTY
Advanced Technology, Inc. believes all information contained herein to be correct. It is the
responsibility of the fabricator/customer to completely test the adhesives and methods of
fabrication to ensure that the results are satisfactory. ATI is not responsible for any fabrication or
ancillary costs involved with using VeneerBric products.
All shipments are to be inspected within 10 working days after delivery. We are to be informed in
writing of any potential adjustment necessary. The seller’s only obligation will be to replace
defective sheets on a one to one basis. Neither the manufacturer nor the seller shall be liable for
any additional damage or loss, directly or indirectly, arising as a result of using VeneerBric
products.
Slight imperfections and color variations from sheet to sheet are possible and considered normal.
Please inspect each sheet carefully before fabrication to ensure it meets your needs.