Akai mpc_fly - Manual (Page 4)

4
Top Panel
2 1
3
10
11
13
14
15
16
17
17
18
19
12
4 5 6 7 8 9
1. DOCK CONNECTOR CABLE – Gently connect this attached cable to the dock
connector port of your iPad.
2. POWER INPUT – Use the included power adapter to connect the unit to a
power outlet. This connection will power and charge the batteries of both MPC
Fly and your iPad.
3. POWER BUTTON – Turns MPC Fly's power on/off. You can also use it to
determine how much power MPC Fly's battery has:
The button will light up different colors to indicate approximately how much
power is remaining:
• Green means it has 30-100% remaining.
• Amber means it has approximately 10-30% remaining.
• Red means it has 10% or less remaining.
You can press and hold the button for 2 seconds to view a more precise
indication, represented by the leftmost column of 4 pads. Each pad represents a
"battery cell."
• A green pad means that "cell" is fully charged.
• An amber pad means that "cell" is partially charged.
• An unlit pad means that "cell" has no charge.
With a full battery, all 4 pads will be green. With a nearly empty battery, the top
3 pads will be unlit, and the bottom pad will be red.
Release the button to return to normal operation.
The button will flash when:
• MPC Fly starts charging
• MPC Fly is about to enter Sleep Mode (if it has not been used in 15
minutes)
After MPC Fly has not been used for 30 minutes, it will automatically turn off.