Box contents, Software cd, Top panel overview – Akai mpk_mini User Manual
Page 3
1
BOX CONTENTS
y MPK mini
y Software CD
y USB-mini cable
y Safety Instructions & Warranty Information
SOFTWARE CD
PC Users: To install the Akai Professional MPK mini Editor, open the contents of the disc, double-click
Setup.exe, and follow the on-screen instructions. To open the editor, connect the MPK mini to your
computer with a standard USB-mini cable (included) then double-click MPK mini Editor.exe.
Mac Users: Drag the contents of the disc to an appropriate location on your hard drive. To open the editor,
connect the MPK mini to your computer with a standard USB-mini cable (included) then double-click the
MPK mini Editor.
Note: Always connect the MPK mini to your computer before opening the editor.
TOP PANEL OVERVIEW
1
2
4 4
6
8 9
10 11
12 12
5
2
2
2
3
3
3
3
3
3
3
3
2
2
7
2
2
1.
USB CONNECTION – Plug a standard USB-mini cable into this outlet and into the USB port of your
computer. The computer’s USB port will provide power to the MPK mini.
2.
8 VELOCITY-SENSITIVE PADS – The pads can be used to trigger drum hits or other samples in your
software. The pads are velocity-sensitive, which makes them very responsive and intuitive to play.
3.
8 ASSIGNABLE KNOBS – Each 270-degree knob can be used to send continuous control data to a
desktop audio workstation or external MIDI device.
4.
PAD BANK 1 / 2 – When either of these buttons are active, the MPK mini's pads will send MIDI Note
messages (from Pad Bank 1 or 2). These messages are assignable in the included software editor.
5.
PROG CHNG – When this button is active, the MPK mini's pads will send Program Change messages.
These messages are assignable in the included software editor.
6.
CC – When this button is active, the MPK mini's pads will send out MIDI Control Change messages.
These messages are assignable in the included software editor.
7.
KEYBOARD – This 25-note keyboard is velocity-sensitive and, in conjunction with the OCTAVE –/+
buttons, can control a nine-octave range. The ARP ON / OFF and PROGRAM buttons allow some of
its keys to access additional commands (see below).