Avanti MO1400SST User Manual

Page 14

Advertising
background image

14

SETTING THE CLOCK

1.

Touch CLOCK pad. This is a 12 hour clock.

2.

Touch CLOCK pad once more. This is a 24 hour

clock.

3.

Use the number pads to enter the correct time. If

you selected 12 hour clock sys tem, the digital

clock allows you to set from 1:00 to 12:59. If you

selected 24 hour clock system, the digital clock

allows you to set from 0:00 to 23:59.You must

touch at least three numbers to set the clock(one

for hour and two for minutes).

4.

Touch CLOCK pad again.

NOTE: When the oven is first plugged in or when

power resumes after a power interruption, the display

will show ENTER CLOCK TIME. If you prefer to not

have the clock displayed, touch RESET.

You can check the clock time while cooking is in

progress by touching the CLOCK pad.

SETTING THE OVEN TIMER

1.

Touch TIMER.

2.

Enter the amount of time by touching the number

pads. Digit time is in minutes and seconds and set

left to right. Set one digit (a 5 for 5 seconds) or up

to four digits (2405 for 24 minutes, 5 seconds).

3.

Touch START/STOP.

NOTE: Time countdown can be seen in display for 3

seconds before clock or cooking time is returned to

display.

Touch TIMER and then touch RESET to cancel

TIMER during timing process.

SETTING A COOKING PROGRAM

A. One-stage Cooking

1.

Use the number pads to set a cooking time. You

can set a cooking time from one second to 99

minutes and 99 seconds.

2.

If you want to set a power level other than 100%

power, touch POWER/MUSIC, then use the

number pads to enter the power level. You can

set the power level from 1 to 9.

Use single digits to set a cooking power level:

3.

Touch START/STOP to start cooking.

B. Multi-stage Cooking

You can program oven for 4 cooking stages. Each

stage can be programmed with a different power level

and time. To program 2-stage, 3-stage or 4-stage

cooking, repeat the one-stage cooking steps 1 and 2

and touch START. The oven will automatically proceed

to the end of cooking stages.

NOTE:

After stage 1 time has elapsed, two beeps sound,

signaling the beginning of stage 2. After total time

has elapsed, 4 beeps sound and END appears in

display. Touch RESET pad or open oven door to

clear END before starting another cooking function.

SPEED DEFROST

1.

Touch SPEED DEFROST.

2.

Enter desired defrosting time by touching correct

number pads. Digital timer sets minutes and

seconds from left to right so a single digit can be

set (5 for 5 seconds ) or up to 4 digits (2405 for 24

minutes 5 seconds).

3.

Touch START/STOP.

Number pad

Cooking power

9

90%

8

80%

7

70%

6

60%

5

50%

4

40%

3

30%

2

20%

1

10%

Advertising