American Bicycle Security Company HDBR Series - Manual

Product HDBR
Capacity HDBR-5: 8 bikes
HDBR-10: 18 bikes
HDBR-20: 36 bikes
Size HDBR-5: 5’ Long
HDBR-10: 10’ Long
HDBR-20: 20’ Long
Materials *Reference these numbers when viewing diagram below.
1. Frame with 2⅜” OD rail and 1⅜" OD pickets
2. End frames - 2⅜" OD
3. Rail - 2⅜" OD
4. ½” X 5½ " Carriage bolts with lock nuts
5. 1½ " X 1½ " Angle clip for anchor
Finishes An after fabrication hot dipped galvanized finish is our standard
option.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
www.ameribike.com
Email: [email protected]
HDBR Rack