Air kit 3 – American Bicycle Security Company Air Kit 3 User Manual
Page 3
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Air Kit 3
Installation
Tools Needed for Installation
Marker or Pencil
Masonry Drill Bit 3/8”
Drill (Hammer drill recommended)
Hammer
Wrench 9/16”
Level
Instructions:
3/8” anchors are shipped with the pump. Place the pump in the
desired location on the ground. Use a marker or pencil to outline the
holes of the flange onto the base material. Drill the holes in
accordance with the specifications shipped with the anchors. Make
sure the holes are at least 3” away from any cracks in the base
material. Use washers to level pump if necessary. Tap in anchors and
follow your specific anchor instructions provided with the rack.
1.
2.
3.
4.