Avocent Eletric Keyboard - Manual (Page 17)

Chapter 2: Installation 11
5. Locate your next input cable. Repeat step 4 until all computers are properly
attached to the SwitchView MP.
6. Locate the power cord that came with your SwitchView MP unit and plug it
into the power connector on the back of the SwitchView MP.
7. Power-up your SwitchView MP unit first, then power up all attached com-
puters.
The SwitchView MP and all attached computers should be powered-down before
servicing the unit. Always disconnect the power cord from the wall outlet.