American Electric Lighting American Revolution 247 Cutoff - Manual

INSTALLATION INSTRUCTIONS
POST TOP LUMINAIRE 247 SERIES & TCL FULL CUTOFF (FC)
American Electric Lighting a division of Acuity Lighting Group, Inc. Granville, OH
DRAWING NO. A72084 REV -- (FRONT) ©2008 ACUITY LIGHTING GROUP, INC. PART NUMBER 057-71-72084
OPENING & CLOSING THE HOOD: OPENING & CLOSING THE HOOD:
1. UNSCREW THE CAPTIVE SCREW LOCATED ON TOP OF THE 1. UNSCREW THE CAPTIVE SCREW LOCATED ON TOP OF THE
COVER. COVER.
2. REMOVE COVER AND DISCONNECT MOLEX CONNECTIONS. 2. REMOVE COVER AND DISCONNECT MOLEX CONNECTIONS.
NOTE: CHECK TO INSURE THAT THE WIRES ARE NOT PINCHED NOTE: CHECK TO INSURE THAT THE WIRES ARE NOT PINCHED
AGAINST THE CASTING DURING RE-INSTALLATION OF THE AGAINST THE CASTING DURING RE-INSTALLATION OF THE
COVER. COVER.
FULL CUTOFF COVER REMOVAL & INSTALLATION: FULL CUTOFF COVER REMOVAL & INSTALLATION:
11.. TO OPEN THE FIXTURE HOOD, LOCATE THE CLOSURE SCREW TO OPEN THE FIXTURE HOOD, LOCATE THE CLOSURE SCREW
LOCATED ON THE STREET SIDE OF THE FIXTURE. (SEE LOCATED ON THE STREET SIDE OF THE FIXTURE. (SEE
FIGURE 1.) FIGURE 1.)
2. UNSCREW THE CAPTIVE CLOSURE SCREW. YOU WILL 2. UNSCREW THE CAPTIVE CLOSURE SCREW. YOU WILL
KNOW KNOW T THE SCREW HE SCREW IS IS COMPLETELY DISENGAGED FROM COMPLETELY DISENGAGED FROM
THE HOOD THE HOOD WHEN WHEN THE SCREW CAN MOVE FREELY UP AND THE SCREW CAN MOVE FREELY UP AND
DOWN. DOWN.
3. OPEN THE HOOD. 3. OPEN THE HOOD.
4. TO CLOSE THE FIXTURE, SIMPLY CLOSE THE 4. TO CLOSE THE FIXTURE, SIMPLY CLOSE THE HOOD AND RE- HOOD AND RE-
TIGHTEN THE CAPTIVE CLOSURE SCREW. TIGHTEN THE CAPTIVE CLOSURE SCREW.
NOTE FOR OPTIONAL NOTE FOR OPTIONAL TRIGGER LATCH: TO OPEN THE UNIT TRIGGER LATCH: TO OPEN THE UNIT
SIMPLY PULL SIMPLY PULL TRIGGER SIMULTANEOUSLY WITH YOU TRIGGER SIMULTANEOUSLY WITH YOUR R INDEX INDEX
FINGER WHILE FINGER WHILE PUSHING UP ON THE HOOD WITH YOUR PUSHING UP ON THE HOOD WITH YOUR THUMBS. THUMBS.
CLOSE THE UNIT BY CLOSE THE UNIT BY CLOSING THE HOOD AND PRESSING CLOSING THE HOOD AND PRESSING DOWN DOWN
UNTIL THE TRIGGER LATCH ENGAGE. UNTIL THE TRIGGER LATCH ENGAGE.
DISCONNECT POWER BEFORE RELAMPING OR WIRING THE FIXTURE.
HOUSING MUST BE GROUNDED TO REDUCE POTENTIAL OF ELECTRICAL SHOCK
READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION
WARNING
!
TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. FOR CODE INTERPRETATION,
CONSULT LOCAL CODE AUTHORITY
RISK OF FIRE. PRODUCT FOR OUTDOOR INSTALLATION AND USE ONLY.
WARNING
CAUTION
!
!
CLOSED HOOD - STREE CLOSED HOOD - STREETT SIDE VIEW SIDE VIEW
FIGURE 1 FIGURE 1
FIGURE 2 FIGURE 2
OPEN HOOD - TOP VIEW OPEN HOOD - TOP VIEW
LOWER LOWER
HOUSING HOUSING
COVER COVER
CAPTIVE CAPTIVE
SCREW FOR SCREW FOR
COVER COVER
CUPOLA CAP CUPOLA CAP
CUPOLA BASE CUPOLA BASE
CUPOLA LENS CUPOLA LENS
ADJUST PHOTO- ADJUST PHOTO-
CONTROL BY LIFTING CONTROL BY LIFTING
& TURNING CUPOLA & TURNING CUPOLA
SIMULTANEOUSLY SIMULTANEOUSLY
HOOD HOOD
CLOSURE CLOSURE
SCREW SCREW
BOSS BOSS
LOWER HOUSING LOWER HOUSING
MIN POLE OD 2.375” MIN POLE OD 2.375”
MAX POLE OD 3” MAX POLE OD 3”
COVER COVER
LAMP SOCKET LAMP SOCKET
LOCATED WITHIN
LOCATED WITHIN
HOOD
HOOD
SET SCREWS (3) SET SCREWS (3)
LADDER REST (2) LADDER REST (2)
-OPTIONAL- -OPTIONAL-
NEMA NEMA
LABEL HERE LABEL HERE
-OPTIONAL- -OPTIONAL-
TRIGGER TRIGGER
LATCH LATCH
-OPTIONAL- -OPTIONAL-