Avaya IPTM96-CM601 - Manual (Page 18)

JC; Reviewed:
SPOC 6/16/2011 Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
18 of 30
IPTM96-CM601
Step Description
5. If the Intra-switch CDR field is set to y on Page 1 of the CDR SYSTEM
PARAMETERS form, then enter the change intra-switch-cdr command to define the
extensions that will be subjected to call detail recording. In the Assigned Members field,
enter the specific extensions whose usage will be tracked with the CDR records.
change intra-switch-cdr Page 1 of 3
INTRA-SWITCH CDR
Assigned Members: 8 of 5000 administered
Extension Extension Extension Extension
10001
10002
10003
10004
10005
10006
10007
10008
6. For each trunk group for which CDR records are desired, verify that CDR reporting is
enabled. Enter the change trunk-group n command, where n is the trunk group number,
to verify that the CDR Reports field is set to y. Repeat for all trunk groups to be reported.
change trunk-group 6 Page 1 of 21
TRUNK GROUP
Group Number: 6 Group Type: sip CDR Reports: y
Group Name: SIP Trunk to SM6 COR: 1 TN: 1 TAC: #06
Direction: two-way Outgoing Display? y
Dial Access? n Night Service:
Queue Length: 0
Service Type: tie Auth Code? n
Member Assignment Method: auto
Signaling Group: 6
Number of Members: 20