Audio-Technica ATW-49CB User Manual
Page 2
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224 330/686-2600
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England 0113 277 1441
www.audio-technica.com
P51773 ©2006 Audio-Technica U.S., Inc. Printed in U.S.A.
One-Year Limited Warranty
Audio-Technica brand products purchased in the U.S.A. are warranted for one year from date of purchase by Audio -Technica U.S., Inc. ( A.T.U.S.)
to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option,
replaced with a new product of equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales
slip or other proof of purchase date. Prior approval from A.T.U.S. is required for return. This warranty excludes defects due to normal wear,
abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or
modification, or removal or defacing of the product labeling.
For return approval and shipping information, contact the Service Dept., Audio -Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law, A.T.U.S. will have no liability for any consequential, incidental, or special damages; any
warranty of merchantability or fitness for particular purpose expires when this warranty expires.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for warranty details.
SPECIFICATIONS
†
FOR ATW-49CB
DESCRIPTION
2-Input Active Combiner
BANDWIDTH
440 MHz to 900 MHz
VSWR
< 1.7:1 (within specified bandwidth)
GAIN
0 dB typical (within specified bandwidth)
IMPEDANCE
50 ohms, typical
(within specified bandwidth)
TERMINATION TYPE
3-BNC Female
WEIGHT
1.8 oz (51 g)
DIMENSIONS
2.38" (61.0 mm) W x
1.83" (47.0 mm) L x
0.92" (23.0 mm) H
DC INPUT
5-14V DC
CURRENT
30 mA @ 12V DC
FINISH ON ENCLOSURE
Chemical film per MIL C 5541
MATERIAL
6063T52 extruded aluminum (sides)
5052-H32 aluminum (top and bottom)
PASS-THROUGH CURRENT
120 mA (maximum to both inputs
combined)
†
Specifications are subject to change without notice.