Audio-Technica MCB4 - Manual (Page 2)

MCB4 Installation and Operation
Fig. A— Connections
To 12VDC
Power Supply
1. Use the included BNC-to-BNC cables to connect the RF OUT of
each M3T Transmitter to the INPUTS of the MCB4 Antenna
Combiner.
2. Attach the antenna (one included with each M3T Transmitter), or
an optional ATW-A49S directional antenna, to the ANTENNA FEED
connector on the MCB4 Antenna Combiner.
3. If desired, connect the MCB4 DC OUTPUT to the DC INPUT of each
M3T transmitter.
4. Plug the included desktop power supply of the MCB4 into the DC
power input. The power supply is designed to operate properly from
any AC power source 100-240V, 50/60 Hz without user adjustment.
Simply connect the power supply to a standard AC power outlet.
1 INPUTS 2
3 4
OUTPUT
+12V DC
600 mA
1 2
ANTENNA FEED
MCB4
ATW-A49
M3T
M3T
M3T
M3T
3 INPUTS 4 INPUT
+12V DC
5A
Whip or Paddle
Antenna
Included BNC-to-BNC
Cables
Included DC Interconnect Cables