Beijer Electronics iX T4A EN - Manual (Page 17)

Operator Panel Drawings
5 Operator Panel Drawings
5.1 Connectors
1 2 3 4
COM 3/4 LAN COM 1/2
Pos. Connector Description
1 Power supply +24 V DC (18-32 V DC)
2 COM 1/2 Communication Ports
3 LAN 1 × 10/100 Base-T (shielded RJ-45)
4 COM 3/4 Communication Ports
5.2 Communication Ports
Serial port, 9-pin female Serial port, 9-pin female
Pin
COM1 COM2 COM3 COM4
1 -
RS422 Tx+
RS485 Tx+/Rx+
-
RS422 Tx+
RS485 Tx+/Rx+
2 RS232 RxD - RS232 RxD -
3 RS232 TxD - RS232 TxD -
4 - RS422 Rx+ - RS422 Rx+
5 GND GND GND GND
6 -
RS422 Tx-
RS485 Tx-/Rx-
-
RS422 Tx-
RS485 Tx-/Rx-
7 RS232 RTS - - RS422 RTS+
8 RS232 CTS - - RS422 RTS-
9 - RS422 Rx- - RS422 Rx-
Note:
In order to utilize two communication ports on the same physical port, the Y-split cable
CAB109 must be used.
Drawing for external cable CAB109 (drawing # Z7100-029E) is available on the web site:
www.beijerelectronics.com
Beijer Electronics, MAEN015F 17