Beijer Electronics iX T15C EN - Manual (Page 19)

Chemical Resistance
5.2 Touch Screen and Overlay
5.2.1 Autotex F157/207
Autotex F157 or F207 covers the overlay surrounding the touch screen.
Solvent Resistance
Autotex F157/F207 withstands exposure of more than 24 hours duration under
DIN 42 115 Part 2 to the following chemicals without visible change:
Acetonitrile Diesel Downey / Lenor (1) Phosphoric acid (<30%)
Ajax / Vim in solution Ethanol Potassium ferricyanide
Alkalicarbonate
solution
(1)
Glycerine Potassium hydroxide (<30%)
Ammonia (<40%) (1) Glycol Pure Turpentine
Acetic acid (<50%) Gumption (1) SBP 60/95 (1)
Ariel powder in
solution
(1)
Hydrochloric acid (<36%) Sulfuric acid (<10%)
Bleach (1) Linseed oil Tomato ketchup
Castor oil Methanol Trichloroacetic acid (<50%)
Caustic soda (<40%) (1) Nitric acid (<10%) White Spirit
Cutting oil Paraffin oil Windex (1)
Cyclohexanol Persil powder in
solution
(1)
Wisk
Diacetone alcohol Petroleum spirit (1) -
(1) Extremely faint glossing of the texture was noted.
Autotex withstands DIN 42 115 Part 2 exposure of up to 1 hour duration to glacial
acetic acid without visible change.
Autotex is not resistant to high pressure steam at over 100 °C or the following
chemicals:
Concentrated mineral acids Benzyl alcohol
Concentrated caustic solution Methylene chloride
Beijer Electronics, MAEN083D 19