Beijer Electronics EPC TA70 AM EN - Manual (Page 2)

Foreword
Installation manual for EPC TA70 AM
Foreword
The EPC AM TA series includes compact, mechanically robust, fanless industrial
Panel PCs.
The embedded PC system is available with a 6.4", 10.4" or 15" high-contrast
industrial color TFT display. The analog resistive touch screen is the basis
of communication between human and machine. The combination of a
standardized CPU unit and different front units efficiently meets customer
requirements. Another advantage is the compact installation dimensions, made
possible by using special processors and cooling elements that effectively reduces
the need of temperamental fan systems. Additionally, hard drives are replaced by
internal NAND Flash and SD cards that contributes to a very low failure quota
despite the often rough industrial conditions.
The EPC AM TA series comes with the Windows® XP Embedded operating
system, which allows you to visualize and control your systems reliably in a harsh
environment.
This manual describes how to install the EPC TA70 AM.
Order no: MAEN039
Copyright © 2010-12 Beijer Electronics AB. All rights reserved.
The information in this document is subject to change without notice and is provided as available at the
time of printing. Beijer Electronics AB, including all its group companies, reserves the right to change any
information without updating this publication. Beijer Electronics AB assumes no responsibility for any
errors that may appear in this document. Read the entire installation manual prior to installing and using
this equipment. Only qualified personnel may install, operate or repair this equipment. Beijer Electronics
AB is not responsible for modified, altered or renovated equipment. Because the equipment has a wide
range of applications, users must acquire the appropriate knowledge to use the equipment properly in their
specific applications. Persons responsible for the application and the equipment must themselves ensure
that each application is in compliance with all relevant requirements, standards and legislation in respect to
configuration and safety. Only parts and accessories manufactured according to specifications set by Beijer
Electronics AB may be used.
BEIJER ELECTRONICS AB, INCLUDING ALL ITS GROUP
COMPANIES, SHALL NOT BE LIABLE TO ANYONE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE INSTALLATION, USE OR
REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,
CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE
THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE PRICE,
AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT
THE SOLE DISCRETION OF BEIJER ELECTRONICS AB .
Beijer Electronics, MAEN039