Beijer Electronics MT 223 EN - Manual (Page 18)

© Elektronik-Systeme LAUER GmbH & Co. KG • 2007 18
Image
height
Range of adjustment: 0 to 100 over adjust-
ment keys (UP / DOWN)
Einstellung der Bildhöhe
V- Linea-
rity
Range of adjustment: 0 to 100 over adjust-
ment keys (UP / DOWN)
Attitude of the vertical linearity. Values > 50
compress the picture in the picture center.
Only actively if the display hight is larger
than the size of the monitor. Values < 50
stretch the picture in the picture center. The
display hight is not changed
V-Position Range of adjustment: 0 to 100 over adjust-
ment keys (UP / DOWN)
Attitude of the vertical picture position. Ac-
tively only if the picture hight is larger than
display screen surface.
Options 1 OSD OSD positions defined selection between
nine firmly
Position OSD select
OSD H-
Position
Range of adjustment: 0 to 100 over adjust-
ment keys (UP / DOWN)
OSD menu in horizontal direction shift
OSD
Duration
5 ... 60 Seconds Adjust the time, after which the OSD menu
is faded out automatically, if no key is
pressed.The attitude takes place between 5
and 60 s in steps to 5 s
OSD
Back-
ground
Opaque – Transparency Background colour of the OSD menu select.
You have the choice between a transparent
or covering background.
Options 2 Structure of menu the same as the structure of the OSD menu (RGB)
Utilities Language English – German Language for the
Picture
freeze
ON – OFF Store (freeze) the picture content
Factory
setting
<UP> push Reset all functions such as brightness, con-
trast… on factory settings.
Mode
Video
normally, extended The function „extended“ activates a special
interlace algorithm. This attitude improves
the representation, particularly of static
video pictures.This attitude affects only on
video signals (PAL, SECAM,NTSC) which
are in full screen mode (no PIP.
Info Structure of menu the same as the structure of the OSD menu (RGB)
6.4.6. Picture in picture possibilities
X: possible combinations