3 technical data, 3technical data – Beijer Electronics EXTER T60/T60c/T60m EN User Manual

Page 13

Advertising
background image

Technical Data

Beijer Electronics, MAEN809D

13

3

Technical Data

Parameter

EXTER T60c

EXTER

T60m

EXTER T60

EXTER

T60m of

hardware

version type no

07600 or higher

Front panel,
W x H x D

202 x 152 x 6 mm

Mounting
depth

57 mm (157 mm including clearance)

Front panel
seal

IP 66

Rear panel
seal

IP 20

Touch screen
material

Touch screen: Polyester on glass, 1 million finger touch operations.
Overlay: Autotex F157/F207 *.

Reverse side
material

Powder-coated aluminum

Weight

0.9 kg

Serial port
RS422/RS485

25-pin D-sub contact, chassis-mounted female with standard locking screws
4-40 UNC.

Serial port
RS232C

9-pin D-sub contact, male with standard locking screws 4-40 UNC.

Ethernet

Shielded RJ 45

USB

Host type A (USB 1.1), max output current 500 mA

Flash memory
for
application

12 MB (incl. fonts)

Real time
clock

±20 PPM + error because of ambient temperature and supply voltage.
Total maximum error: 1 min/month at 25

°C

Temperature coefficient: -0.034±0.006 ppm/°C

2

Real time
clock battery

CR2450 (UL and cUL: Sanyo or Panasonic)
Minimum lifetime: 3 years

Power
consumption
at rated
voltage

Normal: 0.25 A
Maximum: 0.45 A

Normal: 0.2 A
Maximum: 0.4 A

Display

Transmissive
color STN-LCD.
320 x 240 pixels,
64K colors.

Transmissive
monochrome
STN-LCD.
320 x 240 pixels.

TFT-LCD.
320 x 240 pixels,
64K colors.

TFT-LCD.
320 x 240 pixels,
16 greyscales.

CCFL backlight
lifetime at the
ambient
temperature of
+25

°C:

>75,000 h.

CCFL backlight
lifetime at the
ambient
temperature of
+25

°C:

>58,000 h.

LED backlight lifetime at the
ambient temperature of
+25

°C: >20,000 h.

Active area of
display,
W x H

115.2 x 86.4 mm

Fuse

Internal DC fuse, 2.0 AT, 5 x 20 mm

Power supply

+24 V DC (20 - 30 V DC). Power supply connector.
CE: The power supply must conform with the requirements according to IEC
60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the requirements for class
II power supplies.

Advertising