Beijer Electronics iX Panel K70 EN - Manual (Page 10)

Technical Data
3 Technical Data
Parameter iX Panel K70
Front panel, W x H x D 285 x 177 x 6 mm
Mounting depth 56 mm (156 mm including clearance)
Front panel seal IP 66
Rear panel seal IP 20
Keyboard material Membrane switch keyboard with metal domes. Overlay
film of Autotex F157* with print on reverse side. 1 million
operations.
Reverse side
material Powder-coated aluminum
Weight 1.4 kg
Serial port
RS422/RS485 25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC
Serial port RS232C 9-pin D-sub contact, male with standard locking screws 4-40
UNC
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500 mA
Device type B (USB 1.1)
CF-slot Compact flash, type I and II
Real time clock ±20 PPM + error because of ambient temperature and supply
voltage. Total maximum error: 1 min/month at 25 °C.
Temperature coefficient: -0.034±0.006 ppm/°C
2
Rechargeable battery.
Power consumption
at rated voltage Normal: 0.4 A
Maximum: 0.9 A
Display TFT-LCD.640 x 480 pixels, 64K colors.
CCFL backlight lifetime at the ambient temperature of
+25 °C: >50,000 h.
Active area of
display, W x H 131.5 x 98.6 mm
Fuse Internal DC fuse, 3.15 AT, 5 x 20 mm
Power supply +24 V DC (20 - 30 V DC). Power supply connector.
CE: The power supply must conform with the requirements
according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the
requirements for class II power supplies.
Ambient
temperature Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
Storage temperature -20 ° to +70 °C
Relative humidity 5 - 85 % non-condensed
Approvals and
certifications Information is available on the web site
www.beijerelectronics.com
* See section Chemical Resistance for more information.
Beijer Electronics, MAEN996 10