Beijer Electronics iX Panel T70 EN - Manual (Page 14)

Technical Data
4 Technical Data
Parameter iX Panel T70
Front panel, W x H x D 219 x 154 x 6 mm
Mounting depth 56 mm (156 mm including clearance)
Front panel seal IP 66
Rear panel seal IP 20
Keyboard
material/Front
panel Touch screen: Polyester on glass, 1 million finger touch
operations. Overlay: Autotex F157 or F207*.
Reverse side
material Powder-coated aluminum
Weight 1.2 kg
Serial port
RS422/RS485 25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC
Serial port RS232C 9-pin D-sub contact, male with standard locking screws 4-40
UNC
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500 mA
Device type B (USB 1.1)
CF-slot Compact flash, type I and II
Real time clock ±20 PPM + error because of ambient temperature and supply
voltage. Total maximum error: 1 min/month at 25 °C.
Temperature coefficient: -0.034±0.006 ppm/°C
2
Rechargeable battery.
Power consumption
at rated voltage Normal: 0.4 A
Maximum: 0.9 A
Display TFT-LCD.640 x 480 pixels, 64K colors.
CCFL backlight lifetime at the ambient temperature of
+25 °C: >50,000 h.
Active area of
display, W x H 131.5 x 98.6 mm
Fuse Internal DC fuse, 3.15 AT, 5 x 20 mm
Power supply +24 V DC (20 - 30 V DC). Power supply connector.
CE: The power supply must conform with the requirements
according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the
requirements for class II power supplies.
Ambient
temperature Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
Storage temperature -20 ° to +70 °C
Relative humidity 5 - 85 % non-condensed
Approvals and
certifications Information is available on the web site
www.beijerelectronics.com
* See section Chemical Resistance for more information.
Beijer Electronics, MAEN006 14